Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

My PC keeps failing


  • Please log in to reply

#1
LptpUser13

LptpUser13

    Member

  • Member
  • PipPip
  • 74 posts
My computer kept crashing (to a blue screen, then it restarted) it did it sometimes while I was busy on the internet (I have recorded quite a few of the error reports that show up after each crash by screenshots), It seems to have started shortly after I upgraded my Norton 360 to v.6 especially if I try running the Diagnostic Report. Then I started having even more issues, my PC didn't want to stay connected to the internet it gave me multiple reasons why it couldn't be completed i.e. connecting to the wireless network, renewing IP address, and registering with DNS. Then it was doing at times where my IE page would stop working and any windows I had open and my task bar would change to different settings in its looks then a few minutes it would go back to my settings (which I also have a few screenshots of. At that point I couldn't really use anything; the IE pages wouldn't connect right to the internet, you could only open the start menu once, the taskbar freezes as soon as it loads so you couldn't use it or anything on it. I used the system restore back to a date I believe was before the mass amount of problems it worked okay for maybe a week before going right back to the issues, and I tried to use the restore again but it told me it couldn't make any changes. I have not been able to use the windows update because it will not allow any of the downloads. I do not think it is viruses\malware as I have ran Norton scans and Malwarebytes antimalware with seemingly clean results, but that doesn't mean there couldn't be something hidden. As of right at this moment I'm at this point with my PC: I started my PC a few days ago and it worked perfectly fine it didn't seem to be having the above listed problems so I thought maybe it fixed itself(though I know I shouldn't have) but when it went into sleep mode and I woke it from it my taskbar & programs on my desktop completely froze again and I was not able to open/click anything. So as of right now all I can do is turn my laptop on & move the mouse arrow around the screen and I can open some programs sometimes.

-I am using Microsoft XP Pro. Ver. 2002 SP 3

-While the problems did become more apparent after the Norton upgrade, I am not sure that it was the direct cause of all the issues

-I had removed Norton once but it didn't seem to make a difference, so I'm not sure if I need to try to reload a new one & strip the old one off again (maybe a bad download?).

Does anyone have any insight as to what may be behind this endless meltdown? :wacko: Can anyone help me fix it? :smashcomp:
  • 0

Advertisements


#2
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
  • Please download the Event Viewer Tool by Vino Rosso VEW and save it to your Desktop:
  • Double-click VEW.exe
  • Under 'Select log to query', select (as appropriate):
    • Application
    • System
  • Under 'Select type to list', select (as appropriate):
    • Error
    • Information
    • Warning
Then use the 'Date of events' or 'Number of events' as follows:

Either:
  • Click the radio button for 'Number of events'
    Type 3 in the 1 to 20 box (or any number from 1 to 20)
    Then click the Run button.
    Notepad will open with the output log.

  • Click the radio button for 'Date of events'
    In the From: boxes type today's date (presuming the crash happened today) 13 09 2012
    In the To: boxes type today's date (presuming the crash happened today) 14 09 2012
    Then click the Run button.
    Notepad will open with the output log.
Please post the Output log in your next reply
  • 0

#3
LptpUser13

LptpUser13

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts

  • Please download the Event Viewer Tool by Vino Rosso VEW and save it to your Desktop:
  • Double-click VEW.exe
  • Under 'Select log to query', select (as appropriate):
    • Application
    • System
  • Under 'Select type to list', select (as appropriate):
    • Error
    • Information
    • Warning
Then use the 'Date of events' or 'Number of events' as follows:

Either:
  • Click the radio button for 'Number of events'
    Type 3 in the 1 to 20 box (or any number from 1 to 20)
    Then click the Run button.
    Notepad will open with the output log.

  • Click the radio button for 'Date of events'
    In the From: boxes type today's date (presuming the crash happened today) 13 09 2012
    In the To: boxes type today's date (presuming the crash happened today) 14 09 2012
    Then click the Run button.
    Notepad will open with the output log.
Please post the Output log in your next reply


Okay here it is:

Vino's Event Viewer v01c run on Windows XP in English
Report run at 15/09/2012 12:19:05 AM

Note: All dates below are in the format dd/mm/yyyy

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
'Application' Log - error Type
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Log: 'Application' Date/Time: 07/09/2012 7:24:11 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledSPRetry 16610

Log: 'Application' Date/Time: 07/09/2012 7:24:11 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledEvent 16610

Log: 'Application' Date/Time: 07/09/2012 7:24:11 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: Continuously busy for more than a second

Log: 'Application' Date/Time: 07/09/2012 7:24:01 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledSPRetry 6125

Log: 'Application' Date/Time: 07/09/2012 7:24:01 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledEvent 6125

Log: 'Application' Date/Time: 07/09/2012 7:24:01 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: Continuously busy for more than a second

Log: 'Application' Date/Time: 07/09/2012 7:23:59 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledSPRetry 4172

Log: 'Application' Date/Time: 07/09/2012 7:23:59 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledEvent 4172

Log: 'Application' Date/Time: 07/09/2012 7:23:59 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: Continuously busy for more than a second

Log: 'Application' Date/Time: 07/09/2012 7:23:57 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledSPRetry 2016

Log: 'Application' Date/Time: 07/09/2012 7:23:57 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledEvent 2016

Log: 'Application' Date/Time: 07/09/2012 7:23:57 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: Continuously busy for more than a second

Log: 'Application' Date/Time: 06/09/2012 9:56:22 PM
Type: error Category: 0
Event: 1000 Source: Application Error
Faulting application iexplore.exe, version 8.0.6001.18702, faulting module ntdll.dll, version 5.1.2600.6055, fault address 0x00010cce.

Log: 'Application' Date/Time: 03/09/2012 9:07:22 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: Continuously busy for more than a second

Log: 'Application' Date/Time: 03/09/2012 9:07:20 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledSPRetry 4062

Log: 'Application' Date/Time: 03/09/2012 9:07:20 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledEvent 4062

Log: 'Application' Date/Time: 03/09/2012 9:07:20 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: Continuously busy for more than a second

Log: 'Application' Date/Time: 03/09/2012 9:07:18 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledSPRetry 1953

Log: 'Application' Date/Time: 03/09/2012 9:07:18 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: m->NextScheduledEvent 1953

Log: 'Application' Date/Time: 03/09/2012 9:07:18 AM
Type: error Category: 0
Event: 100 Source: Bonjour Service
Task Scheduling Error: Continuously busy for more than a second

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
'Application' Log - information Type
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Log: 'Application' Date/Time: 15/09/2012 12:13:00 AM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 15/09/2012 12:12:48 AM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 15/09/2012 12:12:41 AM
Type: information Category: 0
Event: 1800 Source: SecurityCenter
The Windows Security Center Service has started.

Log: 'Application' Date/Time: 15/09/2012 12:12:35 AM
Type: information Category: 0
Event: 35 Source: N360
The 'N360' service has started.

Log: 'Application' Date/Time: 15/09/2012 12:12:34 AM
Type: information Category: 0
Event: 34 Source: N360
The 'N360' service is starting.

Log: 'Application' Date/Time: 15/09/2012 12:12:29 AM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 15/09/2012 12:12:28 AM
Type: information Category: 0
Event: 100 Source: Bonjour Service
Service started


Log: 'Application' Date/Time: 15/09/2012 12:12:19 AM
Type: information Category: 0
Event: 0 Source: UmxPol
Service started

Log: 'Application' Date/Time: 15/09/2012 12:09:34 AM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 15/09/2012 12:09:24 AM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 14/09/2012 11:57:31 PM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 14/09/2012 11:57:18 PM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 14/09/2012 11:57:10 PM
Type: information Category: 0
Event: 1800 Source: SecurityCenter
The Windows Security Center Service has started.

Log: 'Application' Date/Time: 14/09/2012 11:57:03 PM
Type: information Category: 0
Event: 35 Source: N360
The 'N360' service has started.

Log: 'Application' Date/Time: 14/09/2012 11:57:02 PM
Type: information Category: 0
Event: 34 Source: N360
The 'N360' service is starting.

Log: 'Application' Date/Time: 14/09/2012 11:56:57 PM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 14/09/2012 11:56:54 PM
Type: information Category: 0
Event: 100 Source: Bonjour Service
Service started


Log: 'Application' Date/Time: 14/09/2012 11:56:46 PM
Type: information Category: 0
Event: 0 Source: UmxPol
Service started

Log: 'Application' Date/Time: 13/09/2012 1:51:27 PM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

Log: 'Application' Date/Time: 13/09/2012 1:51:16 PM
Type: information Category: 0
Event: 0 Source: gupdate
The event description cannot be found.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
'Application' Log - warning Type
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
'System' Log - error Type
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Log: 'System' Date/Time: 15/09/2012 12:13:19 AM
Type: error Category: 102
Event: 1003 Source: System Error
Error code 1000008e, parameter1 c0000005, parameter2 f772171d, parameter3 a989d574, parameter4 00000000.

Log: 'System' Date/Time: 14/09/2012 11:58:04 PM
Type: error Category: 6
Event: 16 Source: Windows Update Agent
Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.

Log: 'System' Date/Time: 13/09/2012 2:55:05 PM
Type: error Category: 0
Event: 10005 Source: DCOM
DCOM got error "%1053" attempting to start the service gupdate with arguments "/comsvc" in order to run the server: {4EB61BAC-A3B6-4760-9581-655041EF4D69}

Log: 'System' Date/Time: 13/09/2012 3:44:11 AM
Type: error Category: 102
Event: 1003 Source: System Error
Error code 1000008e, parameter1 c0000005, parameter2 f772171d, parameter3 f79cb574, parameter4 00000000.

Log: 'System' Date/Time: 13/09/2012 3:20:21 AM
Type: error Category: 102
Event: 1003 Source: System Error
Error code 1000008e, parameter1 c0000005, parameter2 f772171d, parameter3 a9493574, parameter4 00000000.

Log: 'System' Date/Time: 13/09/2012 1:24:02 AM
Type: error Category: 102
Event: 1003 Source: System Error
Error code 1000008e, parameter1 c0000005, parameter2 f772171d, parameter3 a9ec8574, parameter4 00000000.

Log: 'System' Date/Time: 11/09/2012 10:09:30 PM
Type: error Category: 0
Event: 10010 Source: DCOM
The server {7160A13D-73DA-4CEA-95B9-37356478588A} did not register with DCOM within the required timeout.

Log: 'System' Date/Time: 09/09/2012 6:13:04 PM
Type: error Category: 102
Event: 1003 Source: System Error
Error code 1000008e, parameter1 c0000005, parameter2 f772171d, parameter3 a7c56574, parameter4 00000000.

Log: 'System' Date/Time: 09/09/2012 12:38:06 PM
Type: error Category: 102
Event: 1003 Source: System Error
Error code 1000008e, parameter1 c0000005, parameter2 f772171d, parameter3 a7c56574, parameter4 00000000.

Log: 'System' Date/Time: 09/09/2012 8:06:17 AM
Type: error Category: 0
Event: 10005 Source: DCOM
DCOM got error "%1053" attempting to start the service gupdate with arguments "/comsvc" in order to run the server: {4EB61BAC-A3B6-4760-9581-655041EF4D69}

Log: 'System' Date/Time: 09/09/2012 2:47:51 AM
Type: error Category: 102
Event: 1003 Source: System Error
Error code 1000008e, parameter1 c0000005, parameter2 f772171d, parameter3 a7c56574, parameter4 00000000.

Log: 'System' Date/Time: 05/09/2012 7:24:32 PM
Type: error Category: 0
Event: 10010 Source: DCOM
The server {4EB61BAC-A3B6-4760-9581-655041EF4D69} did not register with DCOM within the required timeout.

Log: 'System' Date/Time: 04/09/2012 2:55:05 PM
Type: error Category: 0
Event: 10010 Source: DCOM
The server {0002DF01-0000-0000-C000-000000000046} did not register with DCOM within the required timeout.

Log: 'System' Date/Time: 04/09/2012 2:53:04 PM
Type: error Category: 0
Event: 10010 Source: DCOM
The server {0002DF01-0000-0000-C000-000000000046} did not register with DCOM within the required timeout.

Log: 'System' Date/Time: 03/09/2012 8:06:38 PM
Type: error Category: 0
Event: 10010 Source: DCOM
The server {4EB61BAC-A3B6-4760-9581-655041EF4D69} did not register with DCOM within the required timeout.

Log: 'System' Date/Time: 02/09/2012 8:01:42 PM
Type: error Category: 0
Event: 10005 Source: DCOM
DCOM got error "%1053" attempting to start the service gupdate with arguments "/comsvc" in order to run the server: {4EB61BAC-A3B6-4760-9581-655041EF4D69}

Log: 'System' Date/Time: 02/09/2012 3:14:10 PM
Type: error Category: 0
Event: 8003 Source: MRxSmb
The master browser has received a server announcement from the computer J-PC that believes that it is the master browser for the domain on transport NetBT_Tcpip_{0F6C20E3-1B76-4A23-. The master browser is stopping or an election is being forced.

Log: 'System' Date/Time: 02/09/2012 2:59:38 PM
Type: error Category: 0
Event: 10010 Source: DCOM
The server {0002DF01-0000-0000-C000-000000000046} did not register with DCOM within the required timeout.

Log: 'System' Date/Time: 02/09/2012 2:57:15 PM
Type: error Category: 0
Event: 10010 Source: DCOM
The server {0002DF01-0000-0000-C000-000000000046} did not register with DCOM within the required timeout.

Log: 'System' Date/Time: 02/09/2012 2:55:05 PM
Type: error Category: 0
Event: 10010 Source: DCOM
The server {0002DF01-0000-0000-C000-000000000046} did not register with DCOM within the required timeout.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
'System' Log - information Type
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Log: 'System' Date/Time: 15/09/2012 12:17:52 AM
Type: information Category: 8
Event: 18 Source: Windows Update Agent
Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on Saturday, September 15, 2012 at 11:00 PM:
- Windows Malicious Software Removal Tool - September 2012 (KB890830)

Log: 'System' Date/Time: 15/09/2012 12:17:52 AM
Type: information Category: 8
Event: 18 Source: Windows Update Agent
Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on Saturday, September 15, 2012 at 11:00 PM:
- Windows Malicious Software Removal Tool - September 2012 (KB890830)

Log: 'System' Date/Time: 15/09/2012 12:15:17 AM
Type: information Category: 0
Event: 7035 Source: Service Control Manager
The Symantec Real Time Storage Protection service was successfully sent a start control.

Log: 'System' Date/Time: 15/09/2012 12:15:16 AM
Type: information Category: 0
Event: 2003 Source: SRTSP
Symantec Antivirus minifilter successfully loaded.

Log: 'System' Date/Time: 15/09/2012 12:14:02 AM
Type: information Category: 0
Event: 35 Source: W32Time
The time service is now synchronizing the system time with the time source time.windows.com (ntp.m|0x1|192.168.1.110:123->65.55.21.15:123).

Log: 'System' Date/Time: 15/09/2012 12:13:45 AM
Type: information Category: 0
Event: 4201 Source: Tcpip
The system detected that network adapter \DEVICE\TCPIP_{0F6C20E3-1B76-4A23-BC58-F02B1DB0400A} was connected to the network, and has initiated normal operation over the network adapter.

Log: 'System' Date/Time: 15/09/2012 12:13:10 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The IMAPI CD-Burning COM Service service entered the stopped state.

Log: 'System' Date/Time: 15/09/2012 12:13:03 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The IMAPI CD-Burning COM Service service entered the running state.

Log: 'System' Date/Time: 15/09/2012 12:13:03 AM
Type: information Category: 0
Event: 7035 Source: Service Control Manager
The IMAPI CD-Burning COM Service service was successfully sent a start control.

Log: 'System' Date/Time: 15/09/2012 12:13:02 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The SSDP Discovery Service service entered the running state.

Log: 'System' Date/Time: 15/09/2012 12:13:01 AM
Type: information Category: 0
Event: 7035 Source: Service Control Manager
The SSDP Discovery Service service was successfully sent a start control.

Log: 'System' Date/Time: 15/09/2012 12:13:00 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The Google Update Service (gupdate) service entered the stopped state.

Log: 'System' Date/Time: 15/09/2012 12:12:55 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The Application Layer Gateway Service service entered the running state.

Log: 'System' Date/Time: 15/09/2012 12:12:55 AM
Type: information Category: 0
Event: 7035 Source: Service Control Manager
The Application Layer Gateway Service service was successfully sent a start control.

Log: 'System' Date/Time: 15/09/2012 12:12:52 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The Network Location Awareness (NLA) service entered the running state.

Log: 'System' Date/Time: 15/09/2012 12:12:52 AM
Type: information Category: 0
Event: 7035 Source: Service Control Manager
The Network Location Awareness (NLA) service was successfully sent a start control.

Log: 'System' Date/Time: 15/09/2012 12:12:52 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The WMI Performance Adapter service entered the running state.

Log: 'System' Date/Time: 15/09/2012 12:12:52 AM
Type: information Category: 0
Event: 7035 Source: Service Control Manager
The WMI Performance Adapter service was successfully sent a start control.

Log: 'System' Date/Time: 15/09/2012 12:12:52 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The Remote Access Connection Manager service entered the running state.

Log: 'System' Date/Time: 15/09/2012 12:12:48 AM
Type: information Category: 0
Event: 7036 Source: Service Control Manager
The Google Update Service (gupdate) service entered the running state.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
'System' Log - warning Type
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Log: 'System' Date/Time: 09/09/2012 11:51:59 PM
Type: warning Category: 0
Event: 2504 Source: Server
The server could not bind to the transport \Device\NetBT_Tcpip_{0F6C20E3-1B76-4A23-BC58-F02B1DB0400A}.

Log: 'System' Date/Time: 06/09/2012 10:07:52 PM
Type: warning Category: 0
Event: 8021 Source: BROWSER
The browser was unable to retrieve a list of servers from the browser master \\J-PC on the network \Device\NetBT_Tcpip_{0F6C20E3-1B76-4A23-BC58-F02B1DB0400A}. The data is the error code.

Log: 'System' Date/Time: 04/09/2012 2:47:16 PM
Type: warning Category: 0
Event: 2504 Source: Server
The server could not bind to the transport \Device\NetBT_Tcpip_{0F6C20E3-1B76-4A23-BC58-F02B1DB0400A}.

Log: 'System' Date/Time: 03/09/2012 11:29:28 AM
Type: warning Category: 0
Event: 1003 Source: Dhcp
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 001B7787CC07. The following error occurred: The operation was canceled by the user. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

Log: 'System' Date/Time: 02/09/2012 10:13:24 PM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 6:37:35 PM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 3:03:50 PM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 2:49:38 PM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 2:24:47 AM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 1:58:36 AM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 1:44:28 AM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 1:14:26 AM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 1:00:11 AM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 12:24:42 AM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 02/09/2012 12:11:57 AM
Type: warning Category: 0
Event: 8021 Source: BROWSER
The browser was unable to retrieve a list of servers from the browser master \\J-PC on the network \Device\NetBT_Tcpip_{0F6C20E3-1B76-4A23-BC58-F02B1DB0400A}. The data is the error code.

Log: 'System' Date/Time: 02/09/2012 12:01:50 AM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 31/08/2012 6:37:20 PM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 31/08/2012 6:02:38 PM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 31/08/2012 5:42:32 PM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

Log: 'System' Date/Time: 31/08/2012 3:35:52 PM
Type: warning Category: 0
Event: 4226 Source: Tcpip
TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.
  • 0

#4
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
It looks like the Bonjour Service is having some problems. So I would like to see you autoruns now.

Download Autoruns from the link in my signature below:

1: Extract the Autoruns Zip file contents to a folder.
2: Double-click the "Autoruns.exe".
3: Click on the "Everything" tab
4: Click the Options at the top of the Window. In the new little window click the box that states Hide Microsoft Services
5: Go to File then to Export As or Save in some versions.
6: Save the file as AutoRuns.txt file instead of the default .arn to a known location like your Desktop.
7: Attach to your next reply.
8: DO NOT do anything till we have had a chance to study the log and reply with suggestions as to what to remove.

  • 0

#5
LptpUser13

LptpUser13

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts

IJ looks like the Bonjour Service is having some problems. So I would like to see you autoruns now.

Download Autoruns from the link in my signature below:

1: Extract the Autoruns Zip file contents to a folder.
2: Double-click the "Autoruns.exe".
3: Click on the "Everything" tab
4: Click the Options at the top of the Window. In the new little window click the box that states Hide Microsoft Services
5: Go to File then to Export As or Save in some versions.
6: Save the file as AutoRuns.txt file instead of the default .arn to a known location like your Desktop.
7: Attach to your next reply.
8: DO NOT do anything till we have had a chance to study the log and reply with suggestions as to what to remove.


Okay I have attached it. On the one I downloaded it didn't have a Hide Microsoft Services it had a
Hide Microsoft Entries so I Marked that one.

Attached Files


  • 0

#6
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
OK got a few steps to go through so be patient with all this.

Open Autoruns, click on "Logon" tab, and UN-check:

+ "Adobe ARM"
+ "Adobe Reader Speed Launcher"
+ "QuickTime Task"


+ "SunJavaUpdateSched"



When done restart computer and then:



Download TFC by OldTimer to your desktop
  • Please double-click TFC.exe to run it. (Note: If you are running on Vista, right-click on the file and choose Run As Administrator).
  • It will close all programs when run, so make sure you have saved all your work before you begin.
  • Click the Start button to begin the process. Depending on how often you clean temp files, execution time should be anywhere from a few seconds to a minute or two. Let it run uninterrupted to completion.
  • Once it's finished it should reboot your machine. If it does not, please manually reboot the machine yourself to ensure a complete clean.


Download Auslogics Defrag from the link in my signature below. Auslogics Defrag in my opinion is better because:

It does a more comprehensive job at Defragging
It will actually show you what it is doing
At the end of working it will show you how much speed you picked up
You can view a online log of the files that Auslogics defragged
Please do not run any other Auslogics programs other then this one as they may cause unwanted results.







When done with all of the above then please do the following.





Lets see what you have in your startup services area

Please click on
Start and then to Run
Type in msconfig and press Enter
Now click on Services
Click on the Hide All Microsoft Services


Next click on your Print Screen on your keyboard. It is normally the key above your number pad between the F12 key and the Scroll Lock key
Now go to Start
All Programs
Accessories
Paint

In the empty white area click and hold the CTRL key and then click the V
Go to the File option at the top and click on Save As
Save as file type JPEG and save it to your desktop
In your next reply attach the screenshot.
  • 0

#7
LptpUser13

LptpUser13

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts
Sorry it has taken so long to reply. My computer keeps crashing (about 17 times) and not functioning properly causing the need to restart/shutdown (about 23 times). This is the 4th time I've been able to get it to work long enough to log on (though each one stopped working before I could reply) in a day and a half. I had downloaded the Auslogic Defrag but every time I tried to run it it would blue screen crash and restart just like trying to run the Norton D. Report. So I'm not quite sure what to do now.
  • 0

#8
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Please check if you are having the same issues in Safe Mode.
Reboot your PC, and after the first beep keep tapping F8
You will get a text based menu where you will be able to select Safe Mode.
  • 0

#9
LptpUser13

LptpUser13

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts

Please check if you are having the same issues in Safe Mode.
Reboot your PC, and after the first beep keep tapping F8
You will get a text based menu where you will be able to select Safe Mode.


I tried running in safe mode, It went to the choose boot page I clicked safe mode then it went on to the choose what to load page (i.e. windows XP) then I clicked that and it went listed a bunch of drivers then restarted itself. So I cannot get into safe mode to try.
  • 0

#10
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Did it pause and if so what driver did it stop at before it rebooted?
  • 0

Advertisements


#11
LptpUser13

LptpUser13

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts

Did it pause and if so what driver did it stop at before it rebooted?


Sorry again, about nine more blue screen crashes prevented me from a quicker reply.

Yes it did. It stopped on:
multi(0)disk(0)rdisk(0)partition(1)\windows\system32\DRIVERS\kmxstart.sys
  • 0

#12
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
OK this looks to be a driver issue but since you can't get into safe mode we will have t do this a different way. You will have to try a system restore back to a time before the issue started.

Since you can get into normal mode with some work we can try the following first.




Lets see what you have in your startup

Please click on
Start and then to Run
Type in msconfig and press Enter
Now click on Startups
Then uncheck everything and restart.
IMPORTANT! In case of laptop, make sure, you do NOT disable any keyboard, or touchpad entries.
If system boots correctly and is running smoothly and faster then we have a startup problem
Try going back into msconfig and check one item and reboot
Keep doing that till you have found the problem or all are finally checked.
Post back with the results
  • 0

#13
LptpUser13

LptpUser13

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts

OK this looks to be a driver issue but since you can't get into safe mode we will have t do this a different way. You will have to try a system restore back to a time before the issue started.

Since you can get into normal mode with some work we can try the following first.




Lets see what you have in your startup

Please click on
Start and then to Run
Type in msconfig and press Enter
Now click on Startups
Then uncheck everything and restart.
IMPORTANT! In case of laptop, make sure, you do NOT disable any keyboard, or touchpad entries.
If system boots correctly and is running smoothly and faster then we have a startup problem
Try going back into msconfig and check one item and reboot
Keep doing that till you have found the problem or all are finally checked.
Post back with the results



After I unchecked them all and restarted my PC not much changed, as I went along and started to recheck them and restart my PC some of them worked fine and some didn't. And during this process my PC did crash twice, but when I went back to redo it all over again it didn't crash at all.
  • 0

#14
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Crashing as in BSOD or just restarting?
  • 0

#15
LptpUser13

LptpUser13

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts

Crashing as in BSOD or just restarting?


When it did it the two times it did a real quick flash of a blue screen then restarted.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP