No bootable device -- Insert boot disk and press any key. Help Please&
Started by
Georgio96
, Aug 27 2013 01:01 PM
#1
Posted 27 August 2013 - 01:01 PM
#2
Posted 29 August 2013 - 04:40 PM
Hello Georgio96,
Welcome to Geekstogo.
Sorry for the delay in getting to you.
Hmm... you could try the following. Quite a bit to do and it needs to be accurately done:
Download Peazip to the desktop
Run and install the programme
As it installs this page will show, deselect the AVG ticks
Press decline and it will then install cleanly
Download the following files to the desktop .. Right click the links and select save as...then select desktop
Rufus
OTLPE_standard
Right click OTLPE on your desktop and select ..Open as archive
Select OTLPE standard
Click Extract, ensure that desktop is selected
Insert the USB stick Then run Rufus
Select the ISO file on the desktop via the ISO icon.
Press Start Burn
Once the USB has burnt then
Welcome to Geekstogo.
Sorry for the delay in getting to you.
I dont have a boot disk and on multiple occasions have tried to download them and burn them to a disk but it never works so if you know an alternative solution then please can you help me.
Hmm... you could try the following. Quite a bit to do and it needs to be accurately done:
Download Peazip to the desktop
Run and install the programme
As it installs this page will show, deselect the AVG ticks
Press decline and it will then install cleanly
Download the following files to the desktop .. Right click the links and select save as...then select desktop
Rufus
OTLPE_standard
Right click OTLPE on your desktop and select ..Open as archive
Select OTLPE standard
Click Extract, ensure that desktop is selected
Insert the USB stick Then run Rufus
Select the ISO file on the desktop via the ISO icon.
Press Start Burn
Once the USB has burnt then
- Download Farbar Recovery Scan Tool and save it to the flash drive.
- Reboot your infected system using the boot USB you just created.
Note : If you do not know how to set your computer to boot from USB follow the steps here - As the Programme needs to detect your hardware and load the operating system, I would recommend a nice cup of tea whilst it loads
- Your system should now display a Reatogo desktop.
- Locate the flash drive and run FSRT
- The tool will start to run.
- When the tool opens click Yes to disclaimer.
- Press Scan button.
- It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
#3
Posted 06 September 2013 - 01:29 PM
Due to lack of feedback, this topic has been closed.
If you need this topic reopened, please contact a staff member. This applies only to the original topic starter. Everyone else please begin a New Topic.
If you need this topic reopened, please contact a staff member. This applies only to the original topic starter. Everyone else please begin a New Topic.
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users