Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

0x0d1 and 0x0be BSOD


  • Please log in to reply

#1
serpa

serpa

    New Member

  • Member
  • Pip
  • 2 posts
Hi

2 days ago i have many BSOD and i captured one (attached photo) of many, but there aren't any .dpm file of that day, only one from today. Yesterday my pc works perfectly fine, but today morning, i cant even come to desktop, after that i had BSOD (.dpm file attached), and after that i came to the desktop, but after couple minutes computer freeze and when i restart, monitor is dead, and i dont hear if windows is loading so i think its still freezen at bios loading or something. Then i shut down completely and wait couple minutes and start again and than i have tried couple times, but every time it freezed until now. ( i have been in safe mode until now).

Thanks for your time and sorry for my bad English.

Attached Thumbnails

  • IMG_20130825_190930.jpg

Attached Files


  • 0

Advertisements


#2
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
:welcome:
Explanation of bug check code:

0x000000BE: ATTEMPTED_WRITE_TO_READONLY_MEMORY
A driver attempted to write to read-only memory. Commonly occurs after installing a faulty device driver, system service, or firmware. If a driver file is named in the error message, try to correct the problem by disabling, removing, or rolling back the driver.


It would seem you have recently updated a driver that may not be compatible. According to your log it is caused by the TCIP driver.
  • 0

#3
serpa

serpa

    New Member

  • Topic Starter
  • Member
  • Pip
  • 2 posts
After fresh install of windows 7 ultimate it still doesn't work fine. there are dmp files:

Thanks for your help.

Attached Files


  • 0

#4
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Last error message and explanation:



0x0000004E: PFN_LIST_CORRUPT
This indicates that the memory management Page File Number list is corrupted. Can be caused by corrupt physical RAM, or by drivers passing bad memory descriptor lists.



Now we test the memory.


A If you have more than one RAM module installed, try starting computer with one RAM stick at a time.

NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option A

B. If you have only one RAM stick installed...
...run memtest...


1. Download - Pre-Compiled Bootable ISO (.zip). If you prefer to use the USB version then use this link USB KEY
2. Unzip downloaded /memtest86+-4.20.iso.zip file.
3. Inside, you'll find /memtest86+-4.20.iso file.
4. Download, and install ImgBurn: http://www.imgburn.com/
5. Insert blank CD into your CD drive.
6. Open ImgBurn, and click on Write image file to disc
7. Click on Browse for a file... icon:

Posted Image

8. Locate memtest86+-4.20.iso file, and click Open button.
9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:

Posted Image

10. Once the CD is created, boot from it, and memtest will automatically start to run. You may have to change the boot sequence in your BIOS to make it work right.

To change Boot Sequence in your BIOS

Reboot the system and at the first post screen (where it is counting up memory) start tapping the DEL button
This will enter you into the Bios\Cmos area.
Find the Advanced area and click Enter
Look for Boot Sequence or Boot Options and highlight that click Enter
Now highlight the first drive and follow the directions on the bottom of the screen on how to modify it and change it to CDrom.
Change the second drive to the C or Main Drive
Once that is done then click F10 to Save and Exit
You will prompted to enter Y to verify Save and Exit. Click Y and the system will now reboot with the new settings.


The running program will look something like this depending on the size and number of ram modules installed:


Posted Image

It's recommended to run 5-6 passes. Each pass contains very same 8 tests.

This will show the progress of the test. It can take a while. Be patient, or leave it running overnight.

Posted Image

The following image is the test results area:

Posted Image

The most important item here is the “errors” line. If you see ANY errors, even one, most likely, you have bad RAM.
  • 0

#5
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts

A "0x00000124" Stop error message occurs when you use the "hot plugging" feature to add or to remove a PCI Express device on a Windows Server 2008-based computer or on a Windows Vista-based computer



0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).


Both suggest a possible PCI faulty card or plugged in device.
The o50 also suggest a possible memory issue just like the previous post showed.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP