Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

Can't boot Vista after scan using Avast. Stops on aswRvrt.sys when


  • This topic is locked This topic is locked

#1
Dringer

Dringer

    New Member

  • Member
  • Pip
  • 1 posts
After rebooting after a full system scan using Avast, my laptop fails to boot, briefly coming up with a BSOD then going to a Windows Error Recovery screen, trying to boot using the last known good configuration from that screen does the same thing. Starting in safe mode causes it to stop at aswRvrt.sys then restart.
I've seen others with a similar problem but the topics contain dead links so I haven't been able to follow the instructions in them.
Anyone have any ideas on how to proceed?
  • 0

Advertisements


#2
emeraldnzl

emeraldnzl

    GeekU Instructor

  • GeekU Moderator
  • 20,008 posts
Hello Dringer,

Welcome to Geekstogo.

See if you can do this:

Please download Farbar Recovery Scan Tool and save it to a flash drive.

Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:
  • Restart the computer.
  • As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
  • Use the arrow keys to select the Repair your computer menu item.
  • Select English as the keyboard language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account an click Next.

To enter System Recovery Options by using Windows installation disc:
  • Insert the installation disc.
  • Restart your computer.
  • If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
  • Click Repair your computer.
  • Choose your language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account an click Next.
On the System Recovery Options menu you will get the following options:

Startup Repair
System Restore
Windows Complete PC Restore
Windows Memory Diagnostic Tool
Command Prompt

[*]Select Command Prompt
[*]In the command window type in notepad and press Enter.
[*]The notepad opens. Under File menu select Open.
[*]Select "Computer" and find your flash drive letter and close the notepad.
[*]In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
Note: Replace letter e with the drive letter of your flash drive.
[*]The tool will start to run.
[*]When the tool opens click Yes to disclaimer.
[*]Press Scan button.
[*]It will create a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
[/list]
  • 0

#3
emeraldnzl

emeraldnzl

    GeekU Instructor

  • GeekU Moderator
  • 20,008 posts
Due to lack of feedback, this topic has been closed.

If you need this topic reopened, please contact a staff member. This applies only to the original topic starter. Everyone else please begin a New Topic.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP