[notsodumb]

ok so my computer somehow transfered all of my files to my C: disk drive and it restared afterwards i couldnt access my logons not even my other one it runs startup repair but never stops and i need to figure out how to restore it to factory settings without the cd or any sort of back ups made by me cause i havent made any and its a emachine 250 netbook i tried everything i know like f10 alt + f10 restarting it i even took my entire computer apart and tried putting a magnet to everything cause someone told me that would wipe all info plzzzzzzzzzz help!!!! also i run windows 7 but it isnt a genuine software i got it like that from a friend if that matters

Edited by notsodumb, 18 September 2013 - 01:51 AM.

[Advertisements]

This is what the FAQ for the 250 says:

Q: How do I reinstall the Operating System on the computer?

A: Select models have the ability to have the operating system reinstalled from a hidden drive built into the computer. To start the system recovery:

    Restart the computer
    When the eMachines logo appears on the screen, press the Alt and F10 keys repeatedly.
    When prompted with a boot screen, hit the Enter key.
    After the system recovery program has loaded, follow the prompts to reinstall the operating system.

If the ability to reinstall from the previous method is not available or fails during the recovery, recovery of the operating system will need to be from Recovery Media.

    Insert the disk labeled System CD into the computer's disk drive and restart the computer.
    When the eMachines logo appears on the screen, press the F12 key repeatedly.
    Select either CDROM or DVD as the boot device, this may vary depending on the system.
    When prompted for the Recovery CD, remove the System CD and insert the Recovery CD.

    Note: If there are multiple Recovery CDs, please insert the first Recovery CD.

    After the system recovery program has loaded follow the prompts to reinstall the operating system.

Note: If you do not have a set of eMachines Recovery Media you may purchase [url="https://secure.tx.acer.com/RCDB/Main.aspx?brand=emachines"]recovery media online[/url].

[Ztruker]

This is what the FAQ for the 250 says:

Q: How do I reinstall the Operating System on the computer?

A: Select models have the ability to have the operating system reinstalled from a hidden drive built into the computer. To start the system recovery:

    Restart the computer
    When the eMachines logo appears on the screen, press the Alt and F10 keys repeatedly.
    When prompted with a boot screen, hit the Enter key.
    After the system recovery program has loaded, follow the prompts to reinstall the operating system.

If the ability to reinstall from the previous method is not available or fails during the recovery, recovery of the operating system will need to be from Recovery Media.

    Insert the disk labeled System CD into the computer's disk drive and restart the computer.
    When the eMachines logo appears on the screen, press the F12 key repeatedly.
    Select either CDROM or DVD as the boot device, this may vary depending on the system.
    When prompted for the Recovery CD, remove the System CD and insert the Recovery CD.

    Note: If there are multiple Recovery CDs, please insert the first Recovery CD.

    After the system recovery program has loaded follow the prompts to reinstall the operating system.

Note: If you do not have a set of eMachines Recovery Media you may purchase [url="https://secure.tx.acer.com/RCDB/Main.aspx?brand=emachines"]recovery media online[/url].