[Cobi]

Hi. I just got a brand new computer. Its custom built with all the components. It was working fine until I put norton in. I put it in because I thought it had a virus because it could not connect to the internet. So I did a full system scan with norton and then turned my computer off when the scan was done. So then I take the computer apart and upgraded the RAM. I turn it on and it worked fine until I took norton out of the computer. Then turned it off to see if the internet still works. But then the blue screen 0x0000003b. So I dont know what to do I tried to go to safe mode put it wont let me. It always restarts and restarts please help me. I only had this computer for 1 day!!

[Advertisements]

Hello Cobi,

Welcome to Geekstogo.

See if you can do this:

Please download Farbar Recovery Scan Tool and save it to a flash drive.

Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:

• Restart the computer.
• As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
• Use the arrow keys to select the Repair your computer menu item.
• Select English as the keyboard language settings, and then click Next.
• Select the operating system you want to repair, and then click Next.
• Select your user account an click Next.

To enter System Recovery Options by using Windows installation disc:

• Insert the installation disc.
• Restart your computer.
• If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
• Click Repair your computer.
• Choose your language settings, and then click Next.
• Select the operating system you want to repair, and then click Next.
• Select your user account an click Next.

On the System Recovery Options menu you will get the following options:

Startup Repair
System Restore
Windows Complete PC Restore
Windows Memory Diagnostic Tool
Command Prompt
[*]Select Command Prompt
[*]In the command window type in notepad and press Enter.
[*]The notepad opens. Under File menu select Open.
[*]Select "Computer" and find your flash drive letter and close the notepad.
[*]In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
Note: Replace letter e with the drive letter of your flash drive.
[*]The tool will start to run.
[*]When the tool opens click Yes to disclaimer.
[*]Press Scan button.
[*]It will create a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
[/list]

[emeraldnzl]

Hello Cobi,

Welcome to Geekstogo.

See if you can do this:

Please download Farbar Recovery Scan Tool and save it to a flash drive.

Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:

• Restart the computer.
• As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
• Use the arrow keys to select the Repair your computer menu item.
• Select English as the keyboard language settings, and then click Next.
• Select the operating system you want to repair, and then click Next.
• Select your user account an click Next.

To enter System Recovery Options by using Windows installation disc:

• Insert the installation disc.
• Restart your computer.
• If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
• Click Repair your computer.
• Choose your language settings, and then click Next.
• Select the operating system you want to repair, and then click Next.
• Select your user account an click Next.

On the System Recovery Options menu you will get the following options:

Startup Repair
System Restore
Windows Complete PC Restore
Windows Memory Diagnostic Tool
Command Prompt
[*]Select Command Prompt
[*]In the command window type in notepad and press Enter.
[*]The notepad opens. Under File menu select Open.
[*]Select "Computer" and find your flash drive letter and close the notepad.
[*]In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
Note: Replace letter e with the drive letter of your flash drive.
[*]The tool will start to run.
[*]When the tool opens click Yes to disclaimer.
[*]Press Scan button.
[*]It will create a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
[/list]

[emeraldnzl]

Due to lack of feedback, this topic has been closed.

If you need this topic reopened, please contact a staff member. This applies only to the original topic starter. Everyone else please begin a New Topic.