[fnark]

Just a quick check to see if these are all ok, because i messed up my old comp from overheating.
These are taken from the stats on everest.

Sensor Properties
Sensor Type ITE IT8705F (ISA 290h)
Motherboard Name Syntax SV266 / SV400 Series

Temperatures
Motherboard 30 °C (86 °F)
CPU 44 °C (111 °F)
Aux 31 °C (88 °F)

Cooling Fans
CPU 4688 RPM

Voltage Values
CPU Core 1.50 V
+2.5 V 2.53 V
+3.3 V 3.28 V
+5 V 4.92 V
+12 V 12.16 V

[Advertisements]

voltages all look good- dont worry about the minor variations, as long as it is within 5% of what its supposed to be its good.

temps look OK, but is that at idle or under load? it looks like an idle speed temp reading.
what processor (cpu) are you running?

[audioboy]

voltages all look good- dont worry about the minor variations, as long as it is within 5% of what its supposed to be its good.

temps look OK, but is that at idle or under load? it looks like an idle speed temp reading.
what processor (cpu) are you running?

[fnark]

It was idle, but just after playing a game for a while.
The proc is an amd duron 1600+ (1.4 ghz), although i have another question about the cpu- in the post screen on bios and in the system page on the control panel it says unknown cpu type, is this a problem?

[audioboy]

thats a little odd, but I dont think its going to cause any problems.

if you want to, run everest home, it will tell you every detail about your machine.