I get a signal not found message on my monitor. I have changed HDMI and still the same message. Can anyone give me an idea where to go from here?
I get this message on my monitor "signal not found" The computsignal not found
Posted 09 January 2017 - 02:57 AM
Hi Rennhack, and welcome to our forums
When a "signal not found" message is received, the usual steps are as follows:
1 change the cable ( including connectors) twixt Visual Display Unit (VDU) and computer for known good working ones.
2 change the VDU for a known good working one
If after testing with steps 1 and 2 produces no improvement then:
3 Try to use an alternative port on the computer...for example if using an HDMI cable then try a DVI cable twixt computer's Video card and known good working VDU...also try it on motherboard's video output if so equipped
4 try also Dsub ( VGA) cable twixt VGA port and computer and also try it on motherboard's video output if so equipped.
You have provided no details of the machinery you are using so the above steps are necessarily generic only.
Posted 19 January 2017 - 01:23 PM
I had this error when my CPU power connector was not plugged in.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users