Posted 24 November 2019 - 01:26 PM
Posted 24 November 2019 - 06:06 PM
Try first to set the BIOS to Defaults.
Turn of the PSU > press and hold own the case power button for10 seconds.
Trun on the PSU > press the case power on button and imiedatly press and hold the keyboard Del key. The BIOS set up screen should appear.
Tab along to the Exit Menu > select the Load Defualts and exit.
Does your computer restart and enter the OS?
Posted 25 November 2019 - 03:18 PM
Still have black screen. Thanks for the reply and your interest.
Posted 25 November 2019 - 05:00 PM
OK, lets do some checks first.
1 The EATX 12V plug is firmly in place.
2 The CMOS battery is facing the right way up.
3 Clear CMOS jumper is on pins 1&2. Default.
4 Over volt CPU jumpers is on pins 2&3. Default.
5 The GPU is firmly installed in the PCI 16 x 1 Blue slot and the lock lever is fully engaged and the correct power cables are atatched.
6 The display cable is firmly instyalled in matching ports from GPU to monitor.
Power on and test by attempting to enter the BIOS. If fail.
Swap out the display cabe/try all the ports.
Try connecting to a known working monitor.
Move the GPU to the PCE X 2 slot and test.
Test the GPU in another computer.
Swap out the GPU for a known working one.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users