Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works

SATA Hard Drive Seagate 200 GB

  • Please log in to reply



    New Member

  • Member
  • Pip
  • 2 posts
I just finish putting together a new pc system which includes

Antec CS600B Tower
It has an ABIT Motherboard with
512k DDR Memory
Radeon 256 AGP Card
CD Rom
3.5 Floppy Drive
Seagate 200 GB SATA Hard Drive
OS Windows XP

Here is my dilemna, after putting everything together, and firing it up, I get the audible and post test, now I want to install the Window XP operating System
but the pc isn't recognizing the Hard drive, the SATA Driver came with the hard drive, but how can I install the OS if the hard drive isn't firing up, I check all of the connections, signal cable, power cable, and sata cable to mobo ok. Am I missing something, it seems like ATA hard drives are much easier to install the OS on than SATA, anyone with some advice, greatly apreciated. :tazz:
  • 0





  • Member
  • PipPipPip
  • 257 posts
ok, is the drives are a floppy or CD? if on a CD you are kinda SoL inless you can get them on a floppy, cause when you pop in windows XP disk, it will say "press F8 now if you have Raid or SCUSI drivers to install" and then press f8 and pop in the floppy. then you should be good to go!
  • 0

Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP