[wintersun]

Hi All

Can anyone help with this one ??? Its been a week since i installed a LITEON DVDRW-LDW-851S had a few coasters got a fix for the burning software i use (Record Now Max) but today my machine crashed using SHRINK & DVD DECRIPTER this is the error i got when it restarted.

C:\WINDOWS\Minidump\mini 032304-01.dmp
C:\DOCUME1\John\LOCALS1\Temp\WER1.tmp.dir00\sysdata.xml


Thanks

wintersun

[Advertisements]

Welcome wintersun

C:\WINDOWS\Minidump\mini 032304-01.dmp
C:\DOCUME1\John\LOCALS1\Temp\WER1.tmp.dir00\sysdata.xml

Sorry, but this just shows the location of the error file. No information about the actual error is provided.

This type of hard system crash can be difficult to diagnose. Video encoding is very demanding on your system, and any weaknesses are going to be exposed. You may want to test your memory using memtest86: http://www.memtest86.com. Also check for overheating and make sure all your fans are operating.

It could also be a software bug, be sure you have the latest versions of these programs installed on your system.

[admin]

Welcome wintersun

C:\WINDOWS\Minidump\mini 032304-01.dmp
C:\DOCUME1\John\LOCALS1\Temp\WER1.tmp.dir00\sysdata.xml

Sorry, but this just shows the location of the error file. No information about the actual error is provided.

This type of hard system crash can be difficult to diagnose. Video encoding is very demanding on your system, and any weaknesses are going to be exposed. You may want to test your memory using memtest86: http://www.memtest86.com. Also check for overheating and make sure all your fans are operating.

It could also be a software bug, be sure you have the latest versions of these programs installed on your system.

[wintersun]

Thanks for the help overheating has been mentiond to me before and my machine has got a little noisy of late just put it down to wear and tear .

Can the fans be changed ?


Wintersun

[wintersun]

Hi if my fans are at fault how do i tell if my pc is overheating ? when i say fans i have looked inside pc will it just need the cpu fan changed?


Thanks

wintersun

[wintersun]

Is there a walk through on how to use memtest i got it but aint got a clue how to use it

wintersun

[admin]

Installation
===============
Memtest86 is a stand alone program that cannot be executed under windows and must
be loaded from a floppy disk.

To install Memtest86:
- Extract the files from the zip archive
- Open the directory where the files were extracted and click on "install.bat".
- The install program will prompt you for the floppy drive and also prompt you to
  insert a blank floppy.
- To run Memtest86 leave the floppy in the drive and reboot.

NOTE: After the boot floppy has been created you will not be able to read the floppy
from windows.  This is normal.