Jump to content

Welcome to Geeks to Go - Register now for FREE

Need help with your computer or device? Want to learn new tech skills? You're in the right place!
Geeks to Go is a friendly community of tech experts who can solve any problem you have. Just create a free account and post your question. Our volunteers will reply quickly and guide you through the steps. Don't let tech troubles stop you. Join Geeks to Go now and get the support you need!

How it Works Create Account
Photo

Format New External Hard Drive to exFAT with RAW results

Format External Hard Drive exFAT RAW Command Prompt Disk Management FAT32 Volume Partition

  • Please log in to reply

#1
lela

lela

    Member

  • Member
  • PipPip
  • 17 posts

I'd appreciate any great advice on this matter.

 

Last week, I bought a new External Hard Drive (so brand new out of the box).  I want to format the External Hard Drive to exFAT to use on Mac and Win (Win 7 and 10)

 

Disk Management:  I tried a full format via Disk Management but the result was RAW.  However, a quick format seems to work.

 

Command Prompt:  I tried format e: /fs:exFAT  The result was varied and included not valid volume label (which was fixed via Disk Management). 

 

Right now, current state of External Hard Drive:

 

DISKPART> list volume
 
  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0     C   Windows      NTFS   Partition    118 GB  Healthy    Boot
  Volume 1         SYSTEM       FAT32  Partition    260 MB  Healthy    System
  Volume 2         Windows RE   NTFS   Partition    489 MB  Healthy    Hidden
  Volume 3     E   New Volume   exFAT  Partition   3725 GB  Healthy
 
DISKPART> list partition
 
  Partition ###  Type              Size     Offset
  -------------  ----------------  -------  -------
  Partition 1    Reserved           128 MB    17 KB
  Partition 2    Primary           3725 GB   129 MB

 

 

 

1)  Would it be possible for me to format each volume and partition via the Command Prompt to exFAT ? Or, would this present any problems?

 

2) Is it possible that the External Hard Drive was defective or previously used (and returned) by someone else? 

I had previously formatted a similar External Hard Drive (100% to NTFS via the Command Prompt).  I was wondering if this could explain the RAW and also explain the FAT32 partition.

 

 

 


  • 0

Advertisements


#2
SpywareDr

SpywareDr

    Member 3k

  • Member
  • PipPipPipPipPipPip
  • 3,996 posts

If you did not create those partitions (volumes), I'm afraid the drive is not new. :(


  • 0

#3
lela

lela

    Member

  • Topic Starter
  • Member
  • PipPip
  • 17 posts

Thank you SpywareDr

 

I think that you're right.  I just tried to reformat via the Command Prompt diskpart:

 

format fs=exfat

 

After a couple of hours of formatting (I could see the increasing number of the percentage), the following message appeared:

Diskpart has encountered an error: The parameter is incorrect. See the System Event Log for more information
 


  • 0

#4
SpywareDr

SpywareDr

    Member 3k

  • Member
  • PipPipPipPipPipPip
  • 3,996 posts

You're welcome.

 

Does sound like something's wrong with it. I'd request a refund or replacement.


  • 0

#5
lela

lela

    Member

  • Topic Starter
  • Member
  • PipPip
  • 17 posts

I bought one earlier and it formatted very smoothly (except the full format was to NTFS).  However, the problem with the HD was with detection by the tray - such as sometimes, it couldn't be detected by the tray for ejection or safe removal... if I rebooted, it was fine. 

 

So, I returned it and ordered a new one - but this one, as you already know, seems to have some bad sectors or something else.  

 

I already have two HDs from the same respectable brand (though not the same model) - and they're fine - so I kinda trust this brand.  The quality seems to have gone a downhill.  Maybe it's the new colors?  

 

Sigh... I'll try a 3rd one - maybe 3rd time's a charm... 


  • 0

#6
SpywareDr

SpywareDr

    Member 3k

  • Member
  • PipPipPipPipPipPip
  • 3,996 posts

Which brand and model number? The drive manufacturer may have a free hard drive diagnostic utility available for testing the drive. It should also show how many hours it has on it, number of times started up, etc. It should also show if it's failing.


  • 0

#7
lela

lela

    Member

  • Topic Starter
  • Member
  • PipPip
  • 17 posts

Thanks SpywareDr - It's a Toshiba Canvio Advance. I had earlier downloaded the manufacturer's StorageDiagnosticTool.  I tried to "diagnose" the drive, but it didn't really work.  I'll try again on the next "new" drive.

 

I already have two Toshiba Canvio Slims - and I've been using one of them on and off for the past few years (and all is well). 


Edited by lela, 14 September 2021 - 07:56 PM.

  • 0

#8
SpywareDr

SpywareDr

    Member 3k

  • Member
  • PipPipPipPipPipPip
  • 3,996 posts

Sounds good. :thumbsup:


  • 0






Similar Topics


Also tagged with one or more of these keywords: Format, External Hard Drive, exFAT, RAW, Command Prompt, Disk Management, FAT32, Volume, Partition

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP