
Some Help with possible Virus [Solved]
Started by
TheTorment
, Jan 29 2013 04:09 AM
#76
Posted 02 February 2013 - 02:39 PM

#77
Posted 02 February 2013 - 03:21 PM

Could you try OTLPE again please as I am running out of options now
#78
Posted 02 February 2013 - 03:24 PM

how do I do that? Is it with the 'new' screen I have up now?
#79
Posted 02 February 2013 - 03:25 PM

No reboot the computer and then follow the instructions on post 6 where we created the OTLPE Usb http://www.geekstogo...possible-virus/
#80
Posted 02 February 2013 - 03:53 PM

same as before
NTLDR is missing
Press any key to restart
NTLDR is missing
Press any key to restart
#81
Posted 03 February 2013 - 04:59 AM

Hi I have been looking around and the following suggestion was made to me about Iso2USB .. It may be defective
Another programme was recommended to create a USB OTLPE
You already have the OTLPE iso extracted so there is no need to repeat that section
Download Peazip to the desktop
Run and install the programme
As it installs this page will show, deselect the AVG ticks
Press decline and it will then install cleanly
Download the following files to the desktop .. Right click the links and select save as...then select desktop
Rufus
OTLPE_standard
Right click OTLPE on your desktop and select ..Open as archive
Select OTLPE standard
Click Extract, ensure that desktop is selected
Insert the USB stick Then run Rufus

Select the ISO file on the desktop via the ISO icon.
Press Start Burn

Once the USB has burnt then
[*]Download Farbar Recovery Scan Tool and save it to the flash drive.
Another programme was recommended to create a USB OTLPE
You already have the OTLPE iso extracted so there is no need to repeat that section
Download Peazip to the desktop
Run and install the programme
As it installs this page will show, deselect the AVG ticks
Press decline and it will then install cleanly

Download the following files to the desktop .. Right click the links and select save as...then select desktop
Rufus
OTLPE_standard
Right click OTLPE on your desktop and select ..Open as archive

Select OTLPE standard
Click Extract, ensure that desktop is selected
Insert the USB stick Then run Rufus
Select the ISO file on the desktop via the ISO icon.
Press Start Burn
Once the USB has burnt then
[*]Download Farbar Recovery Scan Tool and save it to the flash drive.
- Reboot your system using the boot USB you just created.
Note : If you do not know how to set your computer to boot from USB follow the steps here - As the Programme needs to detect your hardware and load the operating system, I would recommend a nice cup of tea whilst it loads
- Your system should now display a Reatogo desktop.
- Locate the flash drive and run FSRT
- The tool will start to run.
- When the tool opens click Yes to disclaimer.
- Press Scan button.
- It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
#82
Posted 04 February 2013 - 06:18 AM

After booting up I get the windows error recovery page not the Readtogo
#83
Posted 04 February 2013 - 08:26 AM

Still not booting from the USB at all ?
#84
Posted 04 February 2013 - 08:48 AM

No I have tried it a few a few times now.
#85
Posted 04 February 2013 - 12:13 PM

Is it still coming up with the NTLDR problem ? It is beginning to look like this is a job for the repair shop I am afraid, as none of my tools are producing meaningful answers
#86
Posted 07 February 2013 - 01:27 PM

Is it still coming up with the NTLDR problem ? It is beginning to look like this is a job for the repair shop I am afraid, as none of my tools are producing meaningful answers
Hi
Ye it is still showing that message.
A friend had a very quick look and he reckoned the hard drive is gone. Could this be true? Is a replacement one expensive?
#87
Posted 07 February 2013 - 01:43 PM

That is a possibility but we would be unable to run the tools to determine that
As for price they are relatively cheap http://www.dabs.com/...rd-drives/11154
As for price they are relatively cheap http://www.dabs.com/...rd-drives/11154
#88
Posted 07 February 2013 - 04:03 PM

Thats not relatively cheap!!!!! 
Thanks for all the time and effort you spent helping me anyway. It is very much appreciated.

Thanks for all the time and effort you spent helping me anyway. It is very much appreciated.
#89
Posted 11 February 2013 - 05:30 AM

Since this issue appears to be resolved ... this Topic has been closed. Glad we could help. 
If you're the topic starter, and need this topic reopened, please contact a staff member with the address of the thread.
Everyone else please begin a New Topic.

If you're the topic starter, and need this topic reopened, please contact a staff member with the address of the thread.
Everyone else please begin a New Topic.
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
As Featured On:






