I am not sure if this belongs in malware removal but I don't really believe it is a malware issue. I believe it is more likely a driver issue or something along those lines.
Anyways, I can run my computer sometimes for days, at times even week or two on end no issues. Then suddenly Chrome will either freeze and say not responding or it will appear fine but when you click on tabs open they will be blank and you cannot use the internet in Chrome. Usually Firefox works for a minute or two after Chrome stops then I can't even use FireFox to browse so it is almost like it kills the internet connection somehow.
I am getting really sick of it so this morning I checked the logs and this is what I see from this mornings crash about the time. I see four total errors. I will post them separated by ------.
Log Name: Application
Source: ISCT Agent
Date: 9/29/2015 9:34:27 AM
Event ID: 1003
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: Randall-PC
Description:
The description for Event ID 1003 from source ISCT Agent cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
CAgentState::DoPeriodicSuspendResume ****Error in initialize NetDetect, status = 0x2
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="ISCT Agent" />
<EventID Qualifiers="0">1003</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-09-29T13:34:27.000000000Z" />
<EventRecordID>28828</EventRecordID>
<Channel>Application</Channel>
<Computer>Randall-PC</Computer>
<Security />
</System>
<EventData>
<Data>CAgentState::DoPeriodicSuspendResume ****Error in initialize NetDetect, status = 0x2
</Data>
</EventData>
</Event>
-------------------------
Log Name: Application
Source: Microsoft-Windows-EapHost
Date: 9/29/2015 9:34:23 AM
Event ID: 2002
Task Category: Peer
Level: Error
Keywords: Registry
User: SYSTEM
Computer: Randall-PC
Description:
Skipping: Eap method DLL path name validation failed. Error: typeId=43, authorId=9, vendorId=0, vendorType=0
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Microsoft-Windows-EapHost" Guid="{6EB8DB94-FE96-443F-A366-5FE0CEE7FB1C}" />
<EventID>2002</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000001</Keywords>
<TimeCreated SystemTime="2015-09-29T13:34:23.851642700Z" />
<EventRecordID>28820</EventRecordID>
<Correlation />
<Execution ProcessID="1120" ThreadID="1480" />
<Channel>Application</Channel>
<Computer>Randall-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Key Name">Eap method DLL path name</Data>
<Data Name="TypeId">43</Data>
<Data Name="AuthorId">9</Data>
<Data Name="VendorId">0</Data>
<Data Name="VendorType">0</Data>
</EventData>
</Event>
-----------------------------
Log Name: Application
Source: Microsoft-Windows-EapHost
Date: 9/29/2015 9:34:23 AM
Event ID: 2002
Task Category: Peer
Level: Error
Keywords: Registry
User: SYSTEM
Computer: Randall-PC
Description:
Skipping: Eap method DLL path name validation failed. Error: typeId=25, authorId=9, vendorId=0, vendorType=0
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Microsoft-Windows-EapHost" Guid="{6EB8DB94-FE96-443F-A366-5FE0CEE7FB1C}" />
<EventID>2002</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000001</Keywords>
<TimeCreated SystemTime="2015-09-29T13:34:23.851642700Z" />
<EventRecordID>28819</EventRecordID>
<Correlation />
<Execution ProcessID="1120" ThreadID="1480" />
<Channel>Application</Channel>
<Computer>Randall-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Key Name">Eap method DLL path name</Data>
<Data Name="TypeId">25</Data>
<Data Name="AuthorId">9</Data>
<Data Name="VendorId">0</Data>
<Data Name="VendorType">0</Data>
</EventData>
</Event>
-----------------------
Log Name: Application
Source: Microsoft-Windows-EapHost
Date: 9/29/2015 9:34:23 AM
Event ID: 2002
Task Category: Peer
Level: Error
Keywords: Registry
User: SYSTEM
Computer: Randall-PC
Description:
Skipping: Eap method DLL path name validation failed. Error: typeId=17, authorId=9, vendorId=0, vendorType=0
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Microsoft-Windows-EapHost" Guid="{6EB8DB94-FE96-443F-A366-5FE0CEE7FB1C}" />
<EventID>2002</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000001</Keywords>
<TimeCreated SystemTime="2015-09-29T13:34:23.851642700Z" />
<EventRecordID>28818</EventRecordID>
<Correlation />
<Execution ProcessID="1120" ThreadID="1480" />
<Channel>Application</Channel>
<Computer>Randall-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Key Name">Eap method DLL path name</Data>
<Data Name="TypeId">17</Data>
<Data Name="AuthorId">9</Data>
<Data Name="VendorId">0</Data>
<Data Name="VendorType">0</Data>
</EventData>
</Event>
--------------------------------
Does anyone have any idea what is going on or how to fix this? Any and all help appreciated!
![HP desktop - google.com is in Norwegian [Solved] - last post by wayneman50](https://www.geekstogo.com/forum/uploads/profile/photo-thumb-328601.jpg?_r=1546827512)
Answered
![Laptop hangs often [Solved] - last post by DR M](https://www.geekstogo.com/forum/uploads/profile/photo-418842.gif?_r=1578338641)
![Google Chrome keeps getting the default search set to Yahoo [Closed] - last post by Gary R](https://www.geekstogo.com/forum/uploads/profile/photo-thumb-296954.jpg?_r=0)
Sign In
Create Account
