So the ISO that you are using has installed on another computer and installed without issue, if yes, the only thing that I can think of is that the ISO is not installing correctly on the notebook for one reason or another, have you tried disabling secure boot in the BIOS before trying the install, if not give it a try, steps below;
Will the computer still boot into Windows 8/8.1.
Do you still have the recovery partition on the notebook.
For computers that have UEFI as opposed to legacy BIOS, to be able to boot from your USB device you may need to disable secure boot and change UEFI to CSM Boot, not all computers and BIOS are the same, please refer to your user manual if you have one as the following steps are only one such example.
Restart the compute.
While the computer is re-starting,you will need to continually tap or hold down the particular key that will allow you to access the BIOS on your computer, we will use the F2 key as an example here;
After restarting the computer, when the screen goes black, press and hold down the F2 key, wait for the BIOS to load.
Select Security -> Secure Boot and then Disabled.
Select Advanced -> System Configuration and then Boot Mode.
Change UEFI Boot to CSM Boot.
Save the changes and Exit the BIOS, commonly F10.