[kushal]

Windows 7 Enterprise(32bit) is not connecting to the new D-link router while it is connecting to the old router through ethernet cable.

 I tried to reinstall my windows ..even though the problem was not solved. I had reset my router also. Other pc's are able to connect to that router but only that pc is not able to connect.

It is some window related problem only since when i restart my computer, then during boot period , the led in the router turned on but as soon as the window started it goes off.

 

[Advertisements]

   kushal,

 

Couple of questions if I may;

 

When you did the fresh install of Windows did you also reinstall the MB drivers.

Have you installed the driver software for the new D-link router.

Have you checked the Device Manager for any yellow ! or red Xs.

 

Please provide information about your computer, this includes is it a notebook or desktop, is it a custom build or brand name such as Dell or HP, if it is a brand name provide the model name or series number (not serial) if a custom build post the brand and model name or number for the MB, providing these details will enable us to better assist you.

 

NB: So that I can confirm that you have received notification of my reply to your topic please click on the Follow this topic tab at the upper right corner of the page. 

[phillpower2]

   kushal,

 

Couple of questions if I may;

 

When you did the fresh install of Windows did you also reinstall the MB drivers.

Have you installed the driver software for the new D-link router.

Have you checked the Device Manager for any yellow ! or red Xs.

 

Please provide information about your computer, this includes is it a notebook or desktop, is it a custom build or brand name such as Dell or HP, if it is a brand name provide the model name or series number (not serial) if a custom build post the brand and model name or number for the MB, providing these details will enable us to better assist you.

 

NB: So that I can confirm that you have received notification of my reply to your topic please click on the Follow this topic tab at the upper right corner of the page.